Hawa Junior 80 B Pocket

Producer

Fitting for top-running wooden doors up to 80 kg (176 lbs.), with surface mounted running track or running track flush with the ceiling. Optionally with soft and self closing mechanism. Ceiling mounting. Minimal installation height. Wall pocket solution.

Product-Highlights
Security
Well-tried product tested for 100,000 cycles, which corresponds to a service life of about 25 years
Productivity
Easy height adjustment via both suspensions and convenient depth adjustment of the installed door in the wall pocket
Technical guidelines
Max.
80 kg (176 lbs.)
Max.
4000 mm (13' 1 15/32'')
Max.
1500 mm (4' 11 1/16'')
35–80 mm (1 3/8'' to 3 5/32'')
Design / Integration
 
 
Additional breakdown
The length of the running track must be shorter than the diagonal clearance (P2) by at least 80 mm (3 5/32'').
LMB = inside clearance
LMH = inside height
STB = sliding door width
P2 = diagonal clearance
LS = running track
The following factors affect the calculation of the width of the sliding door:
– Open or closed guide groove
– Construction with or without spring stop (25370)
The optional clip-on panel made of aluminum can be clipped onto the retainer profile without additional fixing components. For invisible fastening of the lintel panelling, there is the option of covering the clip panel on site, using panels up to 40 mm (1 9/16'') thick.
The specially developed spring stop for ejecting the door is integrated into the running track without visible fittings on the door edge.
Thanks to the set with a longer hanger bolt, the running track can be covered from below, using removable ceiling elements.
Recommendation: For systems integrated into the ceiling, provide assembly openings or front access to the system – front access of SoftMove is always mandatory.
Completely integrated into the running track, the SoftMove 80 decelerates sliding doors and draws them into their final position.
Evironmental Product Declaration
Additional breakdown
The length of the running track must be shorter than the diagonal clearance (P2) by at least 80 mm (3 5/32'').
LMB = inside clearance
LMH = inside height
STB = sliding door width
P2 = diagonal clearance
LS = running track
The following factors affect the calculation of the width of the sliding door:
– Open or closed guide groove
– Construction with or without spring stop (25370)
The optional clip-on panel made of aluminum can be clipped onto the retainer profile without additional fixing components. For invisible fastening of the lintel panelling, there is the option of covering the clip panel on site, using panels up to 40 mm (1 9/16'') thick.
The specially developed spring stop for ejecting the door is integrated into the running track without visible fittings on the door edge.
Thanks to the set with a longer hanger bolt, the running track can be covered from below, using removable ceiling elements.
Recommendation: For systems integrated into the ceiling, provide assembly openings or front access to the system – front access of SoftMove is always mandatory.
Completely integrated into the running track, the SoftMove 80 decelerates sliding doors and draws them into their final position.
Assembly video
Hawa Junior 80 - Assembly video
Hawa Junior - SoftMove
-->